Ph: 1300 363_ 352
Fax: (02) 8323_ 4000
190 VMCxi Vertical Machining Centre
B190VMCxi
Product Title

Operated by personal computer, the bench top 190VMCxi Vertical Machining Centre is ideally suited for the classroom yet is capable of cutting steel to close tolerances. Special accessories allow the machining of wood and plastics for multimedia design and technology.Pre-loaded anti backlash ball screws and stepping motors with micro-stepping drives allows simultaneous movement of all axes with a system resolution of 0.01mm (0.0004″).

Infinitely variable and programmable spindle speeds from 0.45kw (0.6HP) DC motor with thyristor controlled drive package and overload cut-out.Single phase electricity power supply gives easy transportability and installation.Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.Full perimeter guarding with fail safe switches in the positive (safety) mode on access doors and guards stop spindle and axes movements.6 position tool storage rack.Links with 160TCL lathe and robots in an FMS system.

CNC Features

  • CAM user friendly software with 3D graphical simulation and automatic error checking.
  • ISO format machine programming using G and M codes included as standard.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.
  • Links with major CAD/CAM packages.
  • All major features available on industrial machines are standard.  
 

Safety equipment and features

  • Fully enveloping transparent high impact chip/work guards with fail-safe switch interlocks.
  • Earth leakage current breakers fitted.
  • Emergency stop latching button.
  • Isolator switch lockable with padlock.
  • Integral electrical panel with no volt protection.
  • Positive end stops on all axes.
  • Low voltage control circuitry.
  • Ergonomic positioning of the machine controls.
  • Full graphical on screen test simulation prior to machining operation.

 

Accessories

A range of accessories to enhance the machine are available, including:
  • Automatic 6 position tool changer
  • Airmist coolant
  • Range of work holding devices
  • Woodworking accessories
  • Comprehensive range of tools and holder


                 
  • 1.Automatic 6 position tool changer                
  • 2.80mm 3 jaw self centring chuck
  • 3.100mm 4 jaw independent chuck                  
  • 4.125mm 3 jaw self centring chuck
  • 5.Recommended set of 5 tool holders             
  • 6.Recommended set of tooling 2.80mm 3 jaw self centring 
  • 7.Woodworking attachments                             
  • 8.Cabinet base with lockable door and computer shelf
  • 9.Emergency foot switch                                      
  • 10.Airmist coolant system
  • 11.Machine vice 100 x 75mm capacity
 

Spindle speeds 350 to 3500 rpm
Rapid traverse rate at 100% 2000mm/min (78"/min)
Axis travel X(longitudinal) 225mm (8.9")
Y(cross) 150mm (5.9")
Z(vertical) 140mm(5.5")
System resolution 0.005mm
Table dimensions 410 x 130mm(16.1" x 5.1")
Spindle to table 202mm (7.9")
Centre line of spindle to column 130mm (5.1")
Table to column 5 to 130mm (0.2" x 5.1")
Tee slots 2 x 10mm x 100mm centres

Machine Dimensions

 
 A  890mm
 B  610mm
 C  600mm
 D  680mm
 E  640mm
 
Machine Weight: 150kg (330lbs)

190VMCxi Product Brochure Download

Integrated bench top vertical machining centre specifically designed for educational and training installations.

  • 3D graphicsAutomatic 
  • CAM software
  • Cuts steel, brass, aluminium, plastic and wood
  • BEST support (Boxford Educational Support Team)

Price on application

How to order:

Fax your order to (02) 83234000
Or email your order to admin@designability.com.au
We will send the goods out with an invoice.
To make card payments please call 1300 363 352 

Operated by personal computer, the bench top 190VMCxi Vertical Machining Centre is ideally suited for the classroom yet is capable of cutting steel to close tolerances. Special accessories allow the machining of wood and plastics for multimedia design and technology.Pre-loaded anti backlash ball screws and stepping motors with micro-stepping drives allows simultaneous movement of all axes with a system resolution of 0.01mm (0.0004″).

Infinitely variable and programmable spindle speeds from 0.45kw (0.6HP) DC motor with thyristor controlled drive package and overload cut-out.Single phase electricity power supply gives easy transportability and installation.Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.Full perimeter guarding with fail safe switches in the positive (safety) mode on access doors and guards stop spindle and axes movements.6 position tool storage rack.Links with 160TCL lathe and robots in an FMS system.

CNC Features

  • CAM user friendly software with 3D graphical simulation and automatic error checking.
  • ISO format machine programming using G and M codes included as standard.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.
  • Links with major CAD/CAM packages.
  • All major features available on industrial machines are standard.  
 

Safety equipment and features

  • Fully enveloping transparent high impact chip/work guards with fail-safe switch interlocks.
  • Earth leakage current breakers fitted.
  • Emergency stop latching button.
  • Isolator switch lockable with padlock.
  • Integral electrical panel with no volt protection.
  • Positive end stops on all axes.
  • Low voltage control circuitry.
  • Ergonomic positioning of the machine controls.
  • Full graphical on screen test simulation prior to machining operation.

 

Accessories

A range of accessories to enhance the machine are available, including:
  • Automatic 6 position tool changer
  • Airmist coolant
  • Range of work holding devices
  • Woodworking accessories
  • Comprehensive range of tools and holder


                 
  • 1.Automatic 6 position tool changer                
  • 2.80mm 3 jaw self centring chuck
  • 3.100mm 4 jaw independent chuck                  
  • 4.125mm 3 jaw self centring chuck
  • 5.Recommended set of 5 tool holders             
  • 6.Recommended set of tooling 2.80mm 3 jaw self centring 
  • 7.Woodworking attachments                             
  • 8.Cabinet base with lockable door and computer shelf
  • 9.Emergency foot switch                                      
  • 10.Airmist coolant system
  • 11.Machine vice 100 x 75mm capacity
 

Spindle speeds 350 to 3500 rpm
Rapid traverse rate at 100% 2000mm/min (78"/min)
Axis travel X(longitudinal) 225mm (8.9")
Y(cross) 150mm (5.9")
Z(vertical) 140mm(5.5")
System resolution 0.005mm
Table dimensions 410 x 130mm(16.1" x 5.1")
Spindle to table 202mm (7.9")
Centre line of spindle to column 130mm (5.1")
Table to column 5 to 130mm (0.2" x 5.1")
Tee slots 2 x 10mm x 100mm centres

Machine Dimensions

 
 A  890mm
 B  610mm
 C  600mm
 D  680mm
 E  640mm
 
Machine Weight: 150kg (330lbs)

190VMCxi Product Brochure Download

Product Title
Unit size:

Operated by personal computer, the bench top 190VMCxi Vertical Machining Centre is ideally suited for the classroom yet is capable of cutting steel to close tolerances. Special accessories allow the machining of wood and plastics for multimedia design and technology.Pre-loaded anti backlash ball screws and stepping motors with micro-stepping drives allows simultaneous movement of all axes with a system resolution of 0.01mm (0.0004″).

Infinitely variable and programmable spindle speeds from 0.45kw (0.6HP) DC motor with thyristor controlled drive package and overload cut-out.Single phase electricity power supply gives easy transportability and installation.Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.Full perimeter guarding with fail safe switches in the positive (safety) mode on access doors and guards stop spindle and axes movements.6 position tool storage rack.Links with 160TCL lathe and robots in an FMS system.

CNC Features

  • CAM user friendly software with 3D graphical simulation and automatic error checking.
  • ISO format machine programming using G and M codes included as standard.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.
  • Links with major CAD/CAM packages.
  • All major features available on industrial machines are standard.  
 

Safety equipment and features

  • Fully enveloping transparent high impact chip/work guards with fail-safe switch interlocks.
  • Earth leakage current breakers fitted.
  • Emergency stop latching button.
  • Isolator switch lockable with padlock.
  • Integral electrical panel with no volt protection.
  • Positive end stops on all axes.
  • Low voltage control circuitry.
  • Ergonomic positioning of the machine controls.
  • Full graphical on screen test simulation prior to machining operation.

 

Accessories

A range of accessories to enhance the machine are available, including:
  • Automatic 6 position tool changer
  • Airmist coolant
  • Range of work holding devices
  • Woodworking accessories
  • Comprehensive range of tools and holder


                 
  • 1.Automatic 6 position tool changer                
  • 2.80mm 3 jaw self centring chuck
  • 3.100mm 4 jaw independent chuck                  
  • 4.125mm 3 jaw self centring chuck
  • 5.Recommended set of 5 tool holders             
  • 6.Recommended set of tooling 2.80mm 3 jaw self centring 
  • 7.Woodworking attachments                             
  • 8.Cabinet base with lockable door and computer shelf
  • 9.Emergency foot switch                                      
  • 10.Airmist coolant system
  • 11.Machine vice 100 x 75mm capacity
 

Spindle speeds 350 to 3500 rpm
Rapid traverse rate at 100% 2000mm/min (78"/min)
Axis travel X(longitudinal) 225mm (8.9")
Y(cross) 150mm (5.9")
Z(vertical) 140mm(5.5")
System resolution 0.005mm
Table dimensions 410 x 130mm(16.1" x 5.1")
Spindle to table 202mm (7.9")
Centre line of spindle to column 130mm (5.1")
Table to column 5 to 130mm (0.2" x 5.1")
Tee slots 2 x 10mm x 100mm centres

Machine Dimensions

 
 A  890mm
 B  610mm
 C  600mm
 D  680mm
 E  640mm
 
Machine Weight: 150kg (330lbs)

190VMCxi Product Brochure Download

Operated by personal computer, the bench top 190VMCxi Vertical Machining Centre is ideally suited for the classroom yet is capable of cutting steel to close tolerances. Special accessories allow the machining of wood and plastics for multimedia design and technology.Pre-loaded anti backlash ball screws and stepping motors with micro-stepping drives allows simultaneous movement of all axes with a system resolution of 0.01mm (0.0004″).

Infinitely variable and programmable spindle speeds from 0.45kw (0.6HP) DC motor with thyristor controlled drive package and overload cut-out.Single phase electricity power supply gives easy transportability and installation.Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.Full perimeter guarding with fail safe switches in the positive (safety) mode on access doors and guards stop spindle and axes movements.6 position tool storage rack.Links with 160TCL lathe and robots in an FMS system.

CNC Features

  • CAM user friendly software with 3D graphical simulation and automatic error checking.
  • ISO format machine programming using G and M codes included as standard.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.
  • Links with major CAD/CAM packages.
  • All major features available on industrial machines are standard.  
 

Safety equipment and features

  • Fully enveloping transparent high impact chip/work guards with fail-safe switch interlocks.
  • Earth leakage current breakers fitted.
  • Emergency stop latching button.
  • Isolator switch lockable with padlock.
  • Integral electrical panel with no volt protection.
  • Positive end stops on all axes.
  • Low voltage control circuitry.
  • Ergonomic positioning of the machine controls.
  • Full graphical on screen test simulation prior to machining operation.

 

Accessories

A range of accessories to enhance the machine are available, including:
  • Automatic 6 position tool changer
  • Airmist coolant
  • Range of work holding devices
  • Woodworking accessories
  • Comprehensive range of tools and holder


                 
  • 1.Automatic 6 position tool changer                
  • 2.80mm 3 jaw self centring chuck
  • 3.100mm 4 jaw independent chuck                  
  • 4.125mm 3 jaw self centring chuck
  • 5.Recommended set of 5 tool holders             
  • 6.Recommended set of tooling 2.80mm 3 jaw self centring 
  • 7.Woodworking attachments                             
  • 8.Cabinet base with lockable door and computer shelf
  • 9.Emergency foot switch                                      
  • 10.Airmist coolant system
  • 11.Machine vice 100 x 75mm capacity
 

Spindle speeds 350 to 3500 rpm
Rapid traverse rate at 100% 2000mm/min (78"/min)
Axis travel X(longitudinal) 225mm (8.9")
Y(cross) 150mm (5.9")
Z(vertical) 140mm(5.5")
System resolution 0.005mm
Table dimensions 410 x 130mm(16.1" x 5.1")
Spindle to table 202mm (7.9")
Centre line of spindle to column 130mm (5.1")
Table to column 5 to 130mm (0.2" x 5.1")
Tee slots 2 x 10mm x 100mm centres

Machine Dimensions

 
 A  890mm
 B  610mm
 C  600mm
 D  680mm
 E  640mm
 
Machine Weight: 150kg (330lbs)

190VMCxi Product Brochure Download

© Copyright by Designability 2012 ABN: 35094314708