Ph: 1300 363_ 352
Fax: (02) 8323_ 4000
T220i Floor Standing Lathe
BT220i
Product Title

The PC controlled Boxford T220i lathe is ideally suited to a classroom environment and offers the perfect solution for high tech. education and training requirement’s. The rigid construction allows steel to be cut to close tolerances. Operating on IBM/100% compatible computers, the inclusive user-friendly software has routines for Computer Aided Design [CAD] at both simple and sophisticated levels and will process the drawings through to a full machining routine.

Guaranteed performance

Boxford’s traditional safety, engineering excellence and reliability, guarantee the superb performance of the T220i 3D CNC CADCAM Centre.

CNC features

  • The Boxford software is an integrated suite of powerful CAD/CAM tools.
  • The CAD includes the handling of most text fonts with excellent manipulation routines.
  • Drawings from other CAD applications can also be imported and processed.
  • A full 3D simulation of the manufacturing process, including a cycle time, can be shown enabling work to be proven without the need for trial cutting. Manual Data Input allows programs to be entered using the Industrial Standard Codes.
  • Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.

Accessories

A range of accessories to enhance the machine are available, including: 

  • Tailstock Steady.
  • Flood Coolant System. 
 

Safety equipment and features

  • Full perimeter guarding with interlocking switches on access doors arranged in the positive (safety) mode for spindle stop and feed hold.
  • Overload cut-out on spindle drive.
  • Positive end stops on all axes.
  • Mandatory graphics run required for new programs before machining cycle can be commenced and step by step execution of graphics in advance of cut in machining cycle.
  • Integrated electrical panel with no volt supply protection.
  • Feed rate over-ride.
  • Feed hold.
  • Single block operation.
  • Latching emergency stop button.
  • Power on indicator lamp.
  • Low voltage control circuitry

Swing over bed 210mm
X Axis travel 150mm
Z Axis travel 350mm
Distance between centres 400mm
Spindle bored to pass 25mm
Spindle speed 200-4000rpm
Electrics 220/240v 1 PHASE
Programmable feed(linear and circular interpolation modes) 0-1500mm/min
Rapid feed rate at 100% 1500mm/min

Machine Dimensions

 

A

1000mm

B

720mm

C

1530mm

D

965mm

E

476mm


Machine Weight: 290kg (638lbs)

T220i product Brochure Download

A floor standing Lathe designed for educational and training installations.

  • Integrated CAD software
  • Automatic CAM software
  • Cuts steel, brass, aluminium and plastic
  • 3D graphics
  • BEST support (Boxford Educational Support Team)

Price on application

How to order:

Fax your order to (02) 83234000
Or email your order to admin@designability.com.au
We will send the goods out with an invoice.
To make card payments please call 1300 363 352 

The PC controlled Boxford T220i lathe is ideally suited to a classroom environment and offers the perfect solution for high tech. education and training requirement’s. The rigid construction allows steel to be cut to close tolerances. Operating on IBM/100% compatible computers, the inclusive user-friendly software has routines for Computer Aided Design [CAD] at both simple and sophisticated levels and will process the drawings through to a full machining routine.

Guaranteed performance

Boxford’s traditional safety, engineering excellence and reliability, guarantee the superb performance of the T220i 3D CNC CADCAM Centre.

CNC features

  • The Boxford software is an integrated suite of powerful CAD/CAM tools.
  • The CAD includes the handling of most text fonts with excellent manipulation routines.
  • Drawings from other CAD applications can also be imported and processed.
  • A full 3D simulation of the manufacturing process, including a cycle time, can be shown enabling work to be proven without the need for trial cutting. Manual Data Input allows programs to be entered using the Industrial Standard Codes.
  • Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.

Accessories

A range of accessories to enhance the machine are available, including: 

  • Tailstock Steady.
  • Flood Coolant System. 
 

Safety equipment and features

  • Full perimeter guarding with interlocking switches on access doors arranged in the positive (safety) mode for spindle stop and feed hold.
  • Overload cut-out on spindle drive.
  • Positive end stops on all axes.
  • Mandatory graphics run required for new programs before machining cycle can be commenced and step by step execution of graphics in advance of cut in machining cycle.
  • Integrated electrical panel with no volt supply protection.
  • Feed rate over-ride.
  • Feed hold.
  • Single block operation.
  • Latching emergency stop button.
  • Power on indicator lamp.
  • Low voltage control circuitry

Swing over bed 210mm
X Axis travel 150mm
Z Axis travel 350mm
Distance between centres 400mm
Spindle bored to pass 25mm
Spindle speed 200-4000rpm
Electrics 220/240v 1 PHASE
Programmable feed(linear and circular interpolation modes) 0-1500mm/min
Rapid feed rate at 100% 1500mm/min

Machine Dimensions

 

A

1000mm

B

720mm

C

1530mm

D

965mm

E

476mm


Machine Weight: 290kg (638lbs)

T220i product Brochure Download

Product Title
Unit size:

The PC controlled Boxford T220i lathe is ideally suited to a classroom environment and offers the perfect solution for high tech. education and training requirement’s. The rigid construction allows steel to be cut to close tolerances. Operating on IBM/100% compatible computers, the inclusive user-friendly software has routines for Computer Aided Design [CAD] at both simple and sophisticated levels and will process the drawings through to a full machining routine.

Guaranteed performance

Boxford’s traditional safety, engineering excellence and reliability, guarantee the superb performance of the T220i 3D CNC CADCAM Centre.

CNC features

  • The Boxford software is an integrated suite of powerful CAD/CAM tools.
  • The CAD includes the handling of most text fonts with excellent manipulation routines.
  • Drawings from other CAD applications can also be imported and processed.
  • A full 3D simulation of the manufacturing process, including a cycle time, can be shown enabling work to be proven without the need for trial cutting. Manual Data Input allows programs to be entered using the Industrial Standard Codes.
  • Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.

Accessories

A range of accessories to enhance the machine are available, including: 

  • Tailstock Steady.
  • Flood Coolant System. 
 

Safety equipment and features

  • Full perimeter guarding with interlocking switches on access doors arranged in the positive (safety) mode for spindle stop and feed hold.
  • Overload cut-out on spindle drive.
  • Positive end stops on all axes.
  • Mandatory graphics run required for new programs before machining cycle can be commenced and step by step execution of graphics in advance of cut in machining cycle.
  • Integrated electrical panel with no volt supply protection.
  • Feed rate over-ride.
  • Feed hold.
  • Single block operation.
  • Latching emergency stop button.
  • Power on indicator lamp.
  • Low voltage control circuitry

Swing over bed 210mm
X Axis travel 150mm
Z Axis travel 350mm
Distance between centres 400mm
Spindle bored to pass 25mm
Spindle speed 200-4000rpm
Electrics 220/240v 1 PHASE
Programmable feed(linear and circular interpolation modes) 0-1500mm/min
Rapid feed rate at 100% 1500mm/min

Machine Dimensions

 

A

1000mm

B

720mm

C

1530mm

D

965mm

E

476mm


Machine Weight: 290kg (638lbs)

T220i product Brochure Download

The PC controlled Boxford T220i lathe is ideally suited to a classroom environment and offers the perfect solution for high tech. education and training requirement’s. The rigid construction allows steel to be cut to close tolerances. Operating on IBM/100% compatible computers, the inclusive user-friendly software has routines for Computer Aided Design [CAD] at both simple and sophisticated levels and will process the drawings through to a full machining routine.

Guaranteed performance

Boxford’s traditional safety, engineering excellence and reliability, guarantee the superb performance of the T220i 3D CNC CADCAM Centre.

CNC features

  • The Boxford software is an integrated suite of powerful CAD/CAM tools.
  • The CAD includes the handling of most text fonts with excellent manipulation routines.
  • Drawings from other CAD applications can also be imported and processed.
  • A full 3D simulation of the manufacturing process, including a cycle time, can be shown enabling work to be proven without the need for trial cutting. Manual Data Input allows programs to be entered using the Industrial Standard Codes.
  • Touch sensitive control panel incorporating illuminated push buttons allows the machines to be operated without a computer.
  • Active and accurate tool path graphics continuously displayed line by line during program write, test run and manufacture.

Accessories

A range of accessories to enhance the machine are available, including: 

  • Tailstock Steady.
  • Flood Coolant System. 
 

Safety equipment and features

  • Full perimeter guarding with interlocking switches on access doors arranged in the positive (safety) mode for spindle stop and feed hold.
  • Overload cut-out on spindle drive.
  • Positive end stops on all axes.
  • Mandatory graphics run required for new programs before machining cycle can be commenced and step by step execution of graphics in advance of cut in machining cycle.
  • Integrated electrical panel with no volt supply protection.
  • Feed rate over-ride.
  • Feed hold.
  • Single block operation.
  • Latching emergency stop button.
  • Power on indicator lamp.
  • Low voltage control circuitry

Swing over bed 210mm
X Axis travel 150mm
Z Axis travel 350mm
Distance between centres 400mm
Spindle bored to pass 25mm
Spindle speed 200-4000rpm
Electrics 220/240v 1 PHASE
Programmable feed(linear and circular interpolation modes) 0-1500mm/min
Rapid feed rate at 100% 1500mm/min

Machine Dimensions

 

A

1000mm

B

720mm

C

1530mm

D

965mm

E

476mm


Machine Weight: 290kg (638lbs)

T220i product Brochure Download

© Copyright by Designability 2012 ABN: 35094314708