Use this insert to clean up the rough cut end of the extrusion. Simply ensure that there are no burrs and the end is cut squarely then push the insert in.
How to order:
Fax your order to (02) 83234000
Or email your order to email@example.com
We will send the goods out with an invoice.
To make card payments please call 1300 363 352
This material is to suit the Photon Factor project.
To be used in combination with the white polypropylene sheets. 1 sheet should provide for 4 students.
Polycarbonate sheet 600mm x 100mm x 3mm.
This sheet can be cut to size and used for bracketing in the Photon Factor Project. It is clear to let light pass through. I can be drilled and even bent on a sheetmetal folder.
Polypropylene sheets (700x1500mm) - White.
This material is to suit the Photon Factor and ecolamp projects. For Photon Factor use in combination with the clear polypropylene sheets. 1 sheet should provide for 4 students. Cut into 30mm strips for the Ecolamp project. 1 sheet will do 2 classes.
600mm x 600mm x 50mm sheet.
This is a great modelling material. It can be filed, drilled, cut and sanded. It is soft yet rigid, is safe for students, and is perfect for the Biomouse project. One sheet will do 8 hulls for the Making Waves project (at 300mm x 150mm piece size) and at least 25 Biomouses.
Packs of 100 sheets of 1mm and 1.5mm HIPS for vacuum forming. Sheet size 458mm x 254mm sized for the 725 FLB vacuum former.
Colours: black, white, green, red, blue (each pack is one colour only)
Code: HB10 1mm Black
Code: HW10 1mm White
Code: HR10 1mm Red
Code: HG10 1mm Green
Code: HBLU10 1mm Blue
Code: HB15 1.5mm Black
Code: HW15 1.5mm White
Code: HR15 1.5mm Red
Code: HG15 1.5mm Green
Code: HBLU15 1.5mm Blue