Ph: 1300 363_ 352
Fax: (02) 8323_ 4000
Portable Safety Light Project Kit
KPLPK
Product Title
Unit price:
$7.20

Project Kit contents:
  • 1 x 2AA battery holder with leads
  • 2 x 470Kohm resistor
  • 1 x 33ohm resistor
  • 2 x 10uF capacitor electrolytic
  • 2 x BC547B NPN transistor
  • 2 x high brightness red LED 5mm
  • 1 x bike light PCB
  • A more detailed set of teaching notes on a CDROM

PCB dimensions: 48.5mm x 25.5mm

 

Requires 2 x AA batteries

Project kit unassembled 

Project kit assembled


An electronics project with real life application.   Students complete the circuitry following the instructions and then the real design begins.  What will the Safety light look like?  This design challenge allows a range of possible fabrication processes.  If your school has laser cutting, vacuum forming or CNC capability then put them to good use.  This easy build kit has just ten parts, making it a good introduction to electronics. 

The kit uses two ultra bright red LEDs, which flash rapidly, providing a highly visible light.

Students complete the circuitry following the instructions and then the real design begins. What will the Safety light look like?  This design challenge allows a range of possible fabrication processes.  If your school has laser cutting, vacuum forming or CNC capability then put them to good use.  

Teaching Resource Pack Download

How to order:

Fax your order to (02) 83234000
Or email your order to admin@designability.com.au
We will send the goods out with an invoice.
To make card payments please call 1300 363 352 

Project Kit contents:
  • 1 x 2AA battery holder with leads
  • 2 x 470Kohm resistor
  • 1 x 33ohm resistor
  • 2 x 10uF capacitor electrolytic
  • 2 x BC547B NPN transistor
  • 2 x high brightness red LED 5mm
  • 1 x bike light PCB
  • A more detailed set of teaching notes on a CDROM

PCB dimensions: 48.5mm x 25.5mm

 

Requires 2 x AA batteries

Project kit unassembled 

Project kit assembled


Product Title
Unit size:
Unit price:
$7.20

Project Kit contents:
  • 1 x 2AA battery holder with leads
  • 2 x 470Kohm resistor
  • 1 x 33ohm resistor
  • 2 x 10uF capacitor electrolytic
  • 2 x BC547B NPN transistor
  • 2 x high brightness red LED 5mm
  • 1 x bike light PCB
  • A more detailed set of teaching notes on a CDROM

PCB dimensions: 48.5mm x 25.5mm

 

Requires 2 x AA batteries

Project kit unassembled 

Project kit assembled


Project Kit contents:
  • 1 x 2AA battery holder with leads
  • 2 x 470Kohm resistor
  • 1 x 33ohm resistor
  • 2 x 10uF capacitor electrolytic
  • 2 x BC547B NPN transistor
  • 2 x high brightness red LED 5mm
  • 1 x bike light PCB
  • A more detailed set of teaching notes on a CDROM

PCB dimensions: 48.5mm x 25.5mm

 

Requires 2 x AA batteries

Project kit unassembled 

Project kit assembled


© Copyright by Designability 2012 ABN: 35094314708