Ph: 1300 363_ 352
Fax: (02) 8323_ 4000
Stereo Ipod Dock Project Kit (3.5mm jack version)
KSDPK
Product Title
Unit price:
$13.90

The kit can be powered off a 2V to 15V supply, though the volume is better with a higher supply. It uses a TDA2822M audio amplifier IC which can output 1W per channel. This version is supplied with a iPod lead (shown right). It has a PP3 battery clip and can run off any voltage from 2 to 15 volts.It works nicely off a 9V battery (not supplied) . Output power at 9V is 1W per speaker.

Project Kit contents:


  • 1 x TDA2822M audio amplifer IC
  • 1 x 8 pin IC holder
  • 1 x 1Kohm resistor
  • 2 x 10Kohm resistors
  • 1 x 10Kohm dual potentiometer
  • 2 x 4.7ohm resistors
  • 1 x Red 5mm LED
  • 2 x 100nF capacitors, ceramic disc
  • 2 x 470uF capacitors, electrolytic
  • 2 x 100uF capacitors, electrolytic
  • 1 x 10uF capacitor, electrolytic
  • 1 x 3.5mm jack1 x PP3 clip lead
  • 1 x right angle power switch
  • 1 x DC power socket
  • 2 x speakers (8ohm, 66mm) and connecting wire
  • 1 x deluxe stereo amplifier PCB
  • A more detailed set of teaching notes on a CDROM 

PCB dimensions: 62mm x 50mm.


Project kit unassembled 


Project kit assembled

An electronics project with real life application.   Students complete the circuitry following the instructions and then the real design begins.   This design challenge allows a range of possible fabrication processes.  If your school has laser cutting, vacuum forming or CNC capability then put them to good use.  

The kit has a volume control & power LED. It can be powered by a batteries connected to the PP3 clip or a DC power module can be plugged in when the batteries automatically disconnect and the power supply is used. 

Teaching Resource Pack Download

How to order:

Fax your order to (02) 83234000
Or email your order to admin@designability.com.au
We will send the goods out with an invoice.
To make card payments please call 1300 363 352 

The kit can be powered off a 2V to 15V supply, though the volume is better with a higher supply. It uses a TDA2822M audio amplifier IC which can output 1W per channel. This version is supplied with a iPod lead (shown right). It has a PP3 battery clip and can run off any voltage from 2 to 15 volts.It works nicely off a 9V battery (not supplied) . Output power at 9V is 1W per speaker.

Project Kit contents:


  • 1 x TDA2822M audio amplifer IC
  • 1 x 8 pin IC holder
  • 1 x 1Kohm resistor
  • 2 x 10Kohm resistors
  • 1 x 10Kohm dual potentiometer
  • 2 x 4.7ohm resistors
  • 1 x Red 5mm LED
  • 2 x 100nF capacitors, ceramic disc
  • 2 x 470uF capacitors, electrolytic
  • 2 x 100uF capacitors, electrolytic
  • 1 x 10uF capacitor, electrolytic
  • 1 x 3.5mm jack1 x PP3 clip lead
  • 1 x right angle power switch
  • 1 x DC power socket
  • 2 x speakers (8ohm, 66mm) and connecting wire
  • 1 x deluxe stereo amplifier PCB
  • A more detailed set of teaching notes on a CDROM 

PCB dimensions: 62mm x 50mm.


Project kit unassembled 


Project kit assembled

Product Title
Unit size:
Unit price:
$13.90

The kit can be powered off a 2V to 15V supply, though the volume is better with a higher supply. It uses a TDA2822M audio amplifier IC which can output 1W per channel. This version is supplied with a iPod lead (shown right). It has a PP3 battery clip and can run off any voltage from 2 to 15 volts.It works nicely off a 9V battery (not supplied) . Output power at 9V is 1W per speaker.

Project Kit contents:


  • 1 x TDA2822M audio amplifer IC
  • 1 x 8 pin IC holder
  • 1 x 1Kohm resistor
  • 2 x 10Kohm resistors
  • 1 x 10Kohm dual potentiometer
  • 2 x 4.7ohm resistors
  • 1 x Red 5mm LED
  • 2 x 100nF capacitors, ceramic disc
  • 2 x 470uF capacitors, electrolytic
  • 2 x 100uF capacitors, electrolytic
  • 1 x 10uF capacitor, electrolytic
  • 1 x 3.5mm jack1 x PP3 clip lead
  • 1 x right angle power switch
  • 1 x DC power socket
  • 2 x speakers (8ohm, 66mm) and connecting wire
  • 1 x deluxe stereo amplifier PCB
  • A more detailed set of teaching notes on a CDROM 

PCB dimensions: 62mm x 50mm.


Project kit unassembled 


Project kit assembled

The kit can be powered off a 2V to 15V supply, though the volume is better with a higher supply. It uses a TDA2822M audio amplifier IC which can output 1W per channel. This version is supplied with a iPod lead (shown right). It has a PP3 battery clip and can run off any voltage from 2 to 15 volts.It works nicely off a 9V battery (not supplied) . Output power at 9V is 1W per speaker.

Project Kit contents:


  • 1 x TDA2822M audio amplifer IC
  • 1 x 8 pin IC holder
  • 1 x 1Kohm resistor
  • 2 x 10Kohm resistors
  • 1 x 10Kohm dual potentiometer
  • 2 x 4.7ohm resistors
  • 1 x Red 5mm LED
  • 2 x 100nF capacitors, ceramic disc
  • 2 x 470uF capacitors, electrolytic
  • 2 x 100uF capacitors, electrolytic
  • 1 x 10uF capacitor, electrolytic
  • 1 x 3.5mm jack1 x PP3 clip lead
  • 1 x right angle power switch
  • 1 x DC power socket
  • 2 x speakers (8ohm, 66mm) and connecting wire
  • 1 x deluxe stereo amplifier PCB
  • A more detailed set of teaching notes on a CDROM 

PCB dimensions: 62mm x 50mm.


Project kit unassembled 


Project kit assembled

© Copyright by Designability 2012 ABN: 35094314708